Meter Type | Revised Cost (VAT inclusive) NGN |
Single-Phase Meter | 88,123.30 |
Three-Phase Meter | 154,623.81 |
Kindly note this MAP scheme will run concurrently with the National Mass Metering Programme (NMMP).
DISCLAIMER: Meters provided or purchased under the Meter Asset Provider Framework cannot be moved from the property by the customer.
Here are guidelines that will help you make sure your meter has been activated for use.
The installation form should be sent immediately after installation to the email address submitted during KYC. The meter installer can also capture additional email addresses to receive the installation form prior to submission.
“Please contact our customer care if you didn’t receive your installation form.
0708 067 1170 or 0700 123 5666, [email protected]“
Entering your meter number on our available payment channels should output customer name if activated for vending.
“Please contact our customer care if otherwise.
0708 067 1170 or 0700 123 5666, [email protected]“
Visit our nearest cash office, third party payment channels or our website www.ekedp.com/payment
Please note that meter comes with preloaded units and money value will be deducted either at first vending or subsequent vending.
Preloaded Units by meter type:
Meter type | Preloaded unit (kWh) |
---|---|
04********* | 100 |
43********* | 100 |
95********* | 20 |
45********* | 200 |
0179********* | 100 |
0101********* | 300 |
62********* | 100
|
• Ensure meter is connected to Power Supply (Power LED should be on)
• Ensure your UIU is communicating with the meter:
• For 04*********, 43*********, 95*********,0179*********,
• Pairing of UIU with Meter
Meter type | pairing code |
---|---|
04********* | • #036# • Enter the 11-digit meter serial number. • Meter displays rF CON and ✔ if successful and rF CON and ❌ if unsuccessful. |
430********* | Pairing Sequence: i.e., Meter Number: 43abcdefghi755204↩ last 9 digits of the meter number. ↩ Pairing Sequence: 755204↩ abcdefghi↩ |
43902****** | Pairing Sequence: i.e., Meter Number: 43abcdefghi755204↩ last 9 digits of the meter number. ↩ Pairing Sequence: 755204↩ abcdefghi↩ |
43901****** | Pairing Sequence: 755204↩ i.e., Meter Number: 43abcdefghi |
45********* | Pairing Sequence: 755204↩ i.e., Meter Number: 43abcdefghi |
95********* | Pairing Sequence “900”+” meter’s 11-digits serial number” CIU will display “WRITE OK”, then it will display “COM SETTING”, then it will display “SYN”, and display will scroll if CIU has received information from meter. |
0101********* | Pairing Code: 5258+ [ignore first 4 digits] + [ignore last digit] ↩ i.e.: Meter number = 0101 XXXX YYYY Z Pairing code = 5258 XXXX YYYY |
0179******* | Pairing Sequence “888888”+” meter’s 13-digits serial number” |
62********* | Pairing Sequence: 9999+ “Meter Number” + Enter Key ↩
|
Meter type | Short Code |
---|---|
04********* | #009# |
430******** | 10 ↩ |
43902****** | 10 ↩ |
43901****** | 01 ↩ |
45********* | 009 ↩ |
95********* | 019 ↩ |
0101********* | 01 ↩ |
0179******* | 07 ↩ |
62********* | 801 ↩ |
*Note:
Please note, if you have done all these and still can’t check your available balance, then you might have a faulty CIU box, a faulty meter or there might be no supply from the distribution transformer to the meter. In this case, please contact our customer care for assistance. +234 708 065 5555, [email protected].
How do I load a token into my meter?
• Ensure your meter is connected to a Power Supply (Power LED should be on).
• Ensure your CIU is paired and communicating with the meter.
• Load 20-digit token purchased.